Example Ellution Systems

Examples of typical Ellution Systems

The following figures display typical configurations of Ellution chromatography station. Each configuration is described in details including the ordering numbers of utilized parts for easier reference.


example-1-chr-2-det.png

The HPLC measures on two detectors. Ellution will acquire two separate signals sharing a common timebase (synchronized START/STOP). A resulting chromatogram will contain two signals.
Part numbers: C50 (Ellution Chromatography SW, Single Instrument) + U32 (Colibrick USB dual-channel A/D converter).


example-4-chr.png

Ellution is used to acquire data from four chromatographs. Each chromatograph uses single detector, so it is enough to use four channel card. However it is necessary to purchase Ellution Ad-on instruments to be able to acquire data from four separate systems simultaneously. In this case the signals are completely independent.
Part numbers: C50 (Ellution Chromatography SW, Single Instrument) +3x C55 (Ellution Add-on Instrument SW) + U34 (Colibrick USB 4-channel A/D converter).


example-2-chr-1-multi.png

This example displays a configuration with two chromatography systems (GC + HPLC) where the HPLC system uses multiple detectors. All the detectors attached to the HPLC Instrument will share common timebase (synchronized START/STOP). The GC detector will be independent.
Part numbers: C50 (Ellution Chromatography SW, Single Instrument) + C55 (Ellution Add-on Instrument SW) + U34 (Colibrick USB 4-channel A/D converter).


example-2-chr-1-digit.png

This example displays a configuration with two chromatography systems (GC + LC). The GC is connected and controlled via digital interface, using a GC Control appropriate module.
Part numbers: C50 (Ellution Chromatography SW, Single Instrument) + C55 (Ellution Add-on Instrument SW) +A23 (GC Control SW)+ U32(Colibrick USB dual-channel A/D converter).